What approval for my motorcycle jacket?

 

Choose motogp jacket, taking care to choose the right standard, is very important. You're not going to change your jacket every month. So you need to be properly informed about the standards in force. Then, depending on your use, you will choose the appropriate standard.

A new less restrictive standard

The new imposed on manufacturers of motorcycle jackets, was developed to simplify the choice of bikers.

We obviously do not need the same protection depending on whether we are riding only in the city or whether we are involved in sports motorcycles on the track. This new five- level standard advantageously replaces the EN 13595- certification. It was rarely used because it was too drastic for the average rider, who no longer had any flexibility. And by the same token, no pleasure on his bike.

So everyone can choose the biker jacket with full knowledge of the facts. Level AAA is intended for maximum protection and level C on the other hand is much less resistant to abrasion and tearing. But not everyone is a racer, so it's okay. Between these two extremes, it only takes a little logic to choose the right equipment.

Different levels of protection for my motorcycle jacket

To differentiate the levels of protection of a motorcycle jacket , it is mainly the duration of resistance to abrasion and tearing that is tested.

Depending on the case, there will necessarily be hulls at strategic points. In addition, the quality of the seams will be enhanced.

 

·         The Zone 1 : corresponds to the joints.

·         The Zone 2 : outside legs, hips, arms, back and buttocks.

·         The zone 3 : front of the chest and back of the legs.

We can table thanks to realize that the resistance to abrasion is still very low even for the highest standard ...

T o optimize each motorcycle jacket, manufacturers are now required to put in place protection per zone, for example the elbows and shoulders as well as the back which are much more exposed in the event of a fall than the bust.

This optimization of the areas most vulnerable leaves a good flexibility of the biker jacket. We must not forget that comfort is an important element for a garment of motorcycle . Without comfort, we do not take full advantage of the machine. We get tired more quickly, which is also prejudicial to our safety. Jacket manufacturers have understood this and reinforcements , seams and protections are more and more comfortable .

Always in order to offer each rider the protection they need without going too far, the first three levels of Kawasaki jacket must include shells on the shoulders and elbows while the last two levels do not. However, you should be wary of jackets designed for motorcycle riding which would not effectively resist abrasion in the event of a fall. So check the standard of your jacket.